Products

TSB Type (TOKUDEN Spin-Welding Bobbin)

It is a bobbin having the actual results that can correspond to a metal large size reel by high-performance composite material and our special processing technique.

name	Outer Diameter D mm	Drum Diameter d mm	Inside Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Inner R r mm	Weight kg	Winding Capacity cm3
TSB-400(18-20)-53	400	180	200	53	25	250	6	5.0	18,000
TSB-400(18-22)-133	400	180	220	133	25	270	6	5.4	20,000
TSB-450(28-28)-50	450	280	280	50	15	310	3	8.5	26,000
TSB-450(28-28)-133	450	280	280	133	15	310	3	8.5	26,000
TSB-490(19-19)-120	490	190	195	120	20	238	5	6.4	30,000
TSB-500(23-21)-35	500	230	210	35	25	260	5	7.7	31,000
TSB-500(23-22)-53	500	230	220	53	25	270	5	7.6	33,000
TSB-500(23-27)-53	500	230	270	53	25	320	5	8.0	39,000
TSB-500(23-27)-50	500	230	270	50	25	320	5	8.0	39,000
TSB-500(23-27)-50.8	500	230	270	50.8	25	320	5	8.0	39,000
TSB-500(23-28)-133.4	500	230	280	133.4	25	330	5	7.8	40,000
TSB-600(28-30)-53	600	285	300	53	30	360	5	14.5	62,000
TSB-600(28-30)-133.4	600	285	300	133.4	30	360	5	14.5	62,000
TSB-600(28-33)-53	600	285	330	53	30	390	5	14.5	69,000
TSB-600(28-33)-133.4	600	285	330	133.4	30	390	5	14.5	69,000
TSB-760(34-33)-51	760	340	330	51	40	420	5	23.5	115,000

Sometimes change the specifications without a notice for improvement

TSF Type (TOKUDEN Structural-Form Bobbin)

It is the bobbin which can correspond to the wooden large size / medium size reel which realized high strength and lightweighting by low firing ejection molding and a special processing method.

Name	Outer Diameter D mm	Drum Diameter d mm	Inside Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Inner R r mm	Weight kg	Standard packing quantity	Winding Capacity cm3
TSＦ-350 (15-13)-32	350	150	130	32	17.5	165	2	2.4	5	9,000
TSF-350 (15-16)-32	350	150	165	32	17.5	200	2	2.4	5	12,000
TSF-400 (14-13)-30	400	140	130	30	16	162	5	3.0	5	13,000
TSF-440 (14-17)-30	440	140	170	30	16	202	5	3.8	4	22,000
TSF-440 (24-19)-50	440	240	195	50	16	227	4	4.3	4	19,000
TSF-440 (30-19)-50 Integrated	440	300	192	50	16	224	3	3.5	4	15,000
TSF-440 (30-19)-50	440	300	192	50	16	224	3	3.4	4	15,000
TSF-450 (20-18)-34	450	200	182	34	18	216	6	5.0	4	22,000
TSF-520 (30-30)-50	520	300	300	50	25	350	6	6.7	1	39,600
TSF-550 (25-24)-52	550	250	240	52	30	300	3	6.8	1	44,000
TSF-600 (38-24)-50	600	?380	240	50	30	300	5	7.6	1	38,000
TSF-640 (30-32)-52	640	304	328	52	36	400	6	9.9	1	77,000

Sometimes change the specifications without a notice for improvement.

Cable drum

It is a plastic drum for the electric wire packing that was able to be?superior to the recyclability that exchange is possible by assembling?only damage part with a bolt. Cable drum

Name	Outer Diameter D mm	Drum Diameter d mm	Inside Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Weight kg	Winding Capacity cm3	Starting hole
Name	Outer Diameter D mm	Drum Diameter d mm	Inside Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Weight kg	Winding Capacity cm3	Width mm	Length mm
PL3-3	580	300	328	50	36	400	6	62,284	26	120
PL3-4	610	300	328	50	36	400	7	71,418	25	120
PL4-6	760	350	328	50	46	420	13	115.617	30	150
PL4-7	795	350	328	50	46	420	15	129,624	30	190
PL5-6	820	400	428	75	54	536	20	168,947	35	195
PL6-4	910	450	428	75	56	540	24	207,853	35	240
PL6-6	970	450	428	75	56	540	34	241,725	40	220
PL7-3	970	500	528	75	54	642	28	283,298	53	300
PL8-6	1150	600	528	75	56	640	45	389,642	60	320

Sometimes change the specifications without a notice for improvement.

P・PL Type(Plastic Bobbin type P・PL)

It is a standard bobbin of the JCS( Japan Electric Wire & Cable Marker’s Association standard) accommodation roll up enamel wire mainly. PS：Polystyrene ( High-Impact ) ABS：Acrylonitrile-Butadiene-Styrene ☆■?spec follow JCS 8501:2006

Plastic bobbin type P

Name	Outer Diameter D mm	Drum Diameter d mm	Inside Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Inner R r mm	Weight g	Standard packing quantity	Winding Capacity cm3
P-1G	40	20	40	15	3	46	1	11	800	33
P-2G	60	30	50	15	5	60	1.75	30	500	90
P-3G	70	35	50	15	5	60	3	50	360	113
P-5G(O)	80	40	70	15	6	82	2	85	215	229
P-1(F)	100	50	70	20.5	7	84	3	120	140	348
P-1(N)	100	50	70	16・20	10	90	5	105	112	308
P-1(S)	100	50	70	15.5	10	90	5	105	112	308
P-2(N)	120	60	85	20	8	101	5	145	60	567
P-3	130	60	90	20	10	110	3	170	60	729
P-3(R)	130	80	90	20	10	110	3.5	250	70	617
P-3(R)L	130	80	90	20	10	110	1.5	220	70	687
P-3(R)T	130	80	90	20	10	110	3.5	220	70	617
P-5	160	70	90	20	12	114	5	300	60	1,243
P-5(R)	160	90	90	20	12	114	3	400	48	1,103
P-5(R)L	160	90	90	20	12	114	1.5	310	48	1,169
P-5(R)T	160	90	90	20	12	114	5	305	48	1,017
P-7	160	90	100	20	13	126	5	435	24	1,130
P-7(F)	180	90	100	25	12	124	3	400	36	1,741
P-10	200	90	110	25・30・34	12	134	5	500	27	2,418
B-25(P-15)	250	110	110	32・34	15	140	4	900	18	4,012
P-30	300	130	130	30・34・45	15	160	5	1,300	12	6,858
P-40	350	150	130	32	18	166	5	1,900	8	9,501

Sometimes change the specifications without a notice for improvement.

Plastic Bobbin Type PL

Name	Outer Diameter D mm	Drum Diameter d mm	Inside Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Inner R r mm	Weight g	Standard packing quantity	Winding Capacity cm3
PL-3G(R)	64	45	76	16	5	86	3	50	240	80
PL-5G(R)	76	45	76	16	5	86	3	60	210	172
PL-5G(D)	60	30	70	15	5	80	3	35	360	111
PL-7G	70	35	70	15	8	86	2	60	250	172
PL-1	80	50	100	20	10	120	3	80	112	234
PL-2	100	65	125	20	10	145	3	160	90	452
PL-3	120	76	130	20.5	10	150	7	230	60	557
PL-4	125	80	160	20・26	15	190	3	240	40	800
PL-8	160	100	200	30	15	230	4	555	24	2,057

Sometimes change the specifications without a notice for improvement.

PT・DIN・OP Type

PT type is a JCS standard, and the DIN type is German standardized, and both are RES (Japan resistance alloy industry society standard norm) accommodation products. PS：Polystyrene ( High-Impact ) ABS：Acrylonitrile-Butadiene-Styrene PT・DIN・OP Type

☆■?: JCS standard bobbin

Plastic Bobbin Type PT

Name	Outer Diameter D mm	Drum Diameter d mm	Inner Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Inner R r mm	Weight g	Standard packing quantity	Winding Capacity cm3
PT-1	95.5 105	53.6 58.3	99.6	20	10.2	120	5	140	120	395
PT-2	102 112	60 67	150	20	8	166	6	170	75	588
PT-4	124 140	74 86	170	26	15	200	4	340	40	1,199
PT-10	160 180	96 110	200	26/29/30.5	15	230	5	620	18	2,356
PT-15	180 200	96 110	200	30	15	230	5	740	24	3,424
PT-20	210 230	132 150	250	30	15	280	8	900	12	4,267
PT-25	215 230	110 130	250	30	15	280	7	1,000	12	5,703
PT-25(S)	215 230	110 130	250	30/32/34	15 15	280	7 5	1,000	12	5,703
PT-40	230 260	136 160	300	40	18	336	10	1,350	6	6,770
PT-60	270 300	150 175	350	45	25	400	5	2,300	4	13,529
PT-90	300 315	180 200	425	100	38	501	5	3,900	4	17,479

Sometimes change the specifications without a notice for improvement.

Plastic Bobbin Type DIN

Name	Outer Diameter D mm	Drum Diameter d mm	Inner Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Inner R r mm	Weight g	Standard packing quantity	Winding Capacity cm3
DIN-100	100	63	80	16	10	100	2	125	100	330
DIN-125	125	80	100	16	12.5	125	3	200	64	609
DIN-160	160	100	128	22	16	160	3	350	36	1,378
DIN-200	200	125	160	22	20	200	4	600	18	2,668

Sometimes change the specifications without a notice for improvement.

Plastic Bobbin Type OP(OPEN)

Name	Outer Diameter D mm	Drum Diameter d mm	Inner Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Inner R r mm	Weight g	Standard packing quantity	Winding Capacity cm3
NT-1K	100	75	91	25	34.5	160	1.5	310	48	368
NT-2K	130	99	91	25	42.5	176	2	455	36	627
NT-4K	150.8	115.5	140	25	48.5	237	2	770	18	1,202
OP-2	100	65	110	20	17.5	145	2.25	160	60	491
OP-4	124	74	150	26	25	200	2.5	285	30	1,159
OP-15	200	100	124	29	53	230	3	890	12	3,817
OM-4	135	80	110	20	32.5	175	5	305	32	1,008
P-5(R)O	160	100	88	20	13	114	1.5	330	48	1,133

Sometimes change the specifications without a notice for improvement.

Special・Fiber・Assembling type・Others

It is our original products such as special order product to?various uses and the part. Special・Fiber・Assembling type・Others

Plastic bobbin type Special

Name	Outer Diameter D mm	Drum Diameter d mm	Inside Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Inner R r mm	Weight kg	Standard packing quanatity	Winding Capacity cm3
P-4L	134	100	110	70	7	124	3.5	240	48	529
Stretch copper No.4	120	80	109.2	28	10	129.2	3	240	45	564
Φ82?spool	82.5	61.5	76.3	56.5	2.7	81.7	1	50	200	162
PM-4	152	95	152.4	16	12.5	177.4	3	400	30	1,470
PTW-A	140	70	30	46	4.5	39	1.5	165	80	327
PTW-F	140	70	30	12.5	4.5	39	1.5	165	80	327
SS-200	220	77.5	139	60	3	145	1	365	27	4,532
SS-300	300	76	200	34	4	208	1	815	8	12,670
8inch bobbin	203.2	152.4	101.6	25.45	2.48	106.56	1.32	284	36	1.356
10inch bobbin	254	152.4	101.6	25.45	4	109.6	2	513	16	3,148
Knitting&braiding machine	80	25	58	10	6	100	1	140	100	248
Square wire reel	450	400	65	30	5	75	2.5	2,100	8	1,941
PB-170	170	65	152	20	12	176	3	440	36	2,705
PB-220	220	67	152	20	12	176	3	705	18	4,929
SS-450-150	450	330	150	30.5	4	158	2	2,295	4	11,000
SS-450-100	450	330	100	30.5	4	108	2	2,125	6	7,345
Φ600?terminal reel	595	300	10～60	22/25	13	36～86	3

Sometimes change the specifications without a notice for improvement.

Plastic bobbin type Fiber

Name	Outer Diameter D mm	Drum Diameter d mm	Inside Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Inner R r mm	Weight kg	Standard packing quanatity	Winding Capacity cm3
10K	341	200	218	80	18	254	2	4,100	4	11,910
PM-159	159	99	129	23	16	161	2.5	385	36	1,409
MT-L	152	90	225	80	14	253	1.5	525	12	2,823
MT-LD	125	61	225	51	8	241	1.5	290	32	1,972
MT-S	152	90	145	80	14	173	1.5	375	12	1,605
4K	290	200	208	80	20	248	5	3,750	4	6,273
3L-150	75	22	148.5	13.5	10	178.5	2	120	100	537
3L-160	75	22	160	13.5	10	189.4	2	95	100	572

Sometimes change the specifications without a notice for improvement.

Plastic bobbin type Assembling

Name	Outer Diameter D mm	Drum Diameter d mm	Inside Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Inner R r mm
Φ450?assembling	450	140/216	60～	34	20	90～	10
Φ480?assembling	480	140	220～	34	20	260～	5
Φ500?assembling	490	267	50～	55	20	90～	5
Φ610?assembling	610	318	100～	53･142	20	140～	10

Sometimes change the specifications without a notice for improvement.

Plastic bobbin type Flyer

Name	Outer Diameter D mm	Drum Diameter d mm	Shaft Diameter h mm	Flange Thickness a mm	Inner R r mm	Weight kg	Standard packing quanatity
15kg?flyer	219	205	22	20	15	200	15
40kg?flyer	324	310	40	23	18	400	25
100kg?flyer	373	360	40	25	20	500	20
150kg?flyer	440	426	40	36	20	920	10

Sometimes change the specifications without a notice for improvement.

Plastic bobbin type Pail pack

Name	Outer Diameter D mm	Drum Diameter d mm	Inside Width W mm	Overall Length L mm	Weight kg	Standard packing quanatity
Pail pack	306	285	140	363	1,660	3

Sometimes change the specifications without a notice for improvement.

Stainless steel / extension wire / welding type

It is the bobbin of a high strength design type endured for the?high tension of the winding pressure to wind up. PS：Polystyrene ( High-Impact ) ABS：Acrylonitrile-Butadiene-Styrene Stainless steel / extension wire / welding type

Plastic bobbin type Stainless steel wire

Name	Outer Diameter D mm	Drum Diameter d mm	Inside Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Inner R r mm	Weight kg	Standard packing quantity kg	Winding Capacity cm3
NP-5G	70	45	60	10	10	80	8	60	210	42
NP-1	80	40	70	15	8	86	3	78	210	213
NP-2	100	60	110	15	10	130	5	150	120	389
NP-3N	100	60	130	15	10	150	3	160	90	639
NP-5	120	54	130	15	10	150	2	195	75	1,076
NS-5(I)	119	53	129	16	10	149	2	240	75	1,076
NP-8	155	80	130	16	15	160	3	440	36	1,612,
NS-10	202	117	152.4	32	17.5	187.4	3	900	18	2,958
NP-13(N)	202	117	152.4	32	17.5	187.4	3	880	18	2,958
35LBS	200	90	150	29.5	8	166	3	430	27	3,478

Sometimes change the specifications without a notice for improvement.

Plastic bobbin type extension wire

Name	Outer Diameter D mm	Drum Diameter d mm	Inside Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Inner R r mm	Weight kg	Standard packing quantity kg	Winding Capacity cm3
DP-5K(-)	145	110	150	80	10	170	4	535	36	785
DP-5K(R)	145	110	150	80	10	176	4	560	36	785
DP-5K(T)	145	110	150	70	10	174	4	560	36	785
DP-15K(T)	200	160	180	73	18	216	5	1,100	12	1,484
DP-15K(R)	200	160	180	80	18	216	5	1,330	12	1,484
DP-20	205	130	180	73	18	216	4	1,370	12	3,006
DP-25	280	200	180	73	20	220	5	2,180	8	4,649
DP-35	290	200	208	133	20	248	5	3,130	4	6,270
DP-50(SW)	300	215	260	133	23	306	6	4,800	1	7,494
DP-B3	320	162	177	25.2	20	217	5	2,660	4	9,706

Sometimes change the specifications without a notice for improvement.

Plastic bobbin type Welding

Name	Outer Diameter D mm	Drum Diameter d mm	Inside Width W mm	Shaft Diameter h mm	Flange Thickness a mm	Overall Length L mm	Inner R r mm	Weight kg	Standard packing quantity kg	Winding Capacity cm3
1KSP(guide)	100	40	40	16	2.5	45	1.25	54	264	248
1KSP(no guide)	100	40	40	16	2.5	45	1.25	54	264	248
2KSP	120	60	44	17.5	3	50	1.25	90	120	340
5KSP	202	105	45	52	5	55	1	290	40	1,024
12.5KSP	270	182	90	52	7	104	3	545	20	2,871
12.5K(S)	285	210	89	52	7	103	2	670	20	2,436
12.5K(F)	285	195	89	52	7	103	3	600	20	2,783
20K(S)	270	148	89.9	52	7	103.5	2	690	20	3,448
25KSP	285	145	90	52	7	104	2	820	20	4,093

Sometimes change the specifications without a notice for improvement.

Attention of the handling

Please be careful to the following items? to use this product safely.
Please do not? drop it from the high place, and do not give an excessive shock from the outside.
Please do not use the neighborhood of high temperature / a chemical / the oil.
When abnormality such as a crack / breaking is seen in a product, please cancel use.